Robotic Pool Cleaners & Ten Features to Look For

You might think robotic pool cleaners are a thing of the future, but actually, they have been around for quite a while. These powerful little machines suck up small and large debris. They don’t attach to your pool circulation system or rely on your pool filter; rather, they run on electricity by themselves.

Robotic pool cleaners navigate through the pool, scrubbing walls and floors with tiny brushes. They vacuum everything from small insects to acorns. Some models can even clean the waterline around the pool.  A built-in bag/cartridge holds debris. Since they filter and clean the water, pool robots are considered a secondary pool filter. As water is sucked in, debris is collected in a filter that removes up to two microns for a superiorly clean pool.

Running on low voltage, robotic pool cleaners are submersible. They have extremely long power cords that should only be plugged into Ground-Fault Circuit Interrupter (GFCI) outlets, which automatically shut off if any electrical imbalance is detected. Certain models are double insulated, meaning they are designed to work safely without the grounding prong. To ensure you don’t get shocked, only use GFCI outlets around water sources.

So, what features should you look for if you are in the market for a robotic pool cleaner? Here are ten suggestions:

Weight: Make sure you can lift it in-and-out of the pool with ease.

Tires: Wide rubber tires and four-wheel drive capabilities help the robot traverse over bumps.

Cord: Since cords can easily tangle, make sure it’s a swivel cord to enable proper movement.

Brushes: Seek robots with hard-bristle brushes or multiple rotating brushes that can scrub well.

Timer: Programmable timers are a breeze – set it and forget it.

Terrain: Ensure the robotic pool cleaner can climb the sides, waterline, or stairs with ease.

Sensors: Deflecting features help prevent the robot from getting stuck in a corner or on obstacles.

Efficiency: Cleaning cycles should be moderate, and multiple cycle options are ideal.

Durability: Read the warranty before using your cleaner, so you know what to do if it fails.

Energy: Try to avoid models that use more than 1,000 watts per hour as they can be expensive to operate over time.

For all of your pool renovation needs, contact the experts at Pound Pool Plastering today.

Pound Pool Plastering offers free estimates and complete pool renovations. Dale Pound, owner, personally oversees each pool project to ensure the highest quality is delivered. We offer Diamond Brite, Sunstone, Hydrazzo, Marcite, Pebble finishes, Bead Crete, tile choices, coping stones, etc. We are pool renovation experts – contact us today at 248-476-4544 or poundpool@sbcglobal.net.

Written by the digital marketing staff at Creative Programs & Systems: www.cpsmi.com.

%d bloggers like this: